Judy Niemeyer
  • Phone: 406-393-2646

Cactus Flower Table Runner Instructions
Cactus Flower Table Runner
Judy Niemeyer Quilting
www.quiltworx.com
 
Pre-cutting the fabrics is a mandatory requirement prior to taking this course. Please begin preparing for class at least 1-WEEKS prior to the class to make sure that you are able to get familiar with your pattern and complete the pre-cutting beforehand. It is important that you have your pre-class cutting completed. If this step is not completed, you will have a very difficult time keeping up and participating in the instruction. We recommend reading through your entire pattern before beginning.
 
CORRECTIONS: PLEASE visit our website prior to class and make sure that you have the latest corrections for the pattern.  Corrections are listed in our pattern gallery on our website at http://quiltworx.com/patterns. Click on the Cactus Flower Table Runner pattern and check the right column of the webpage for more information.  If your pattern has a QR Code printed on the back, you may also scan this with your smartphone to go directly to the page and upload the corrections to your phone. 
 
Foundation Papers and Template Sheets: Please refer to Page 1 of your pattern, and ‘Setting up your Bags #1-3’ on Page 2 of your pattern. 
 
Cutting Instructions: Please read through ‘General Information’ on page 1 of your pattern before completing the steps below. We recommend checking our website for pattern corrections before you begin cutting your fabric. Note: Please make sure all of the Template Sheets, Foundation Sheets, and fabric pieces are placed in the correct bags! 

Cutting Instructions: Follow the first two steps for each unit under ‘Cutting Instructions, Bag #1, Center Spikes‘ on page 2 of your pattern, ‘Cutting Instructions, Bag #2, Unit M‘ on page 3 of your pattern, and ‘Cutting Instructions, Bag #3, Background Border‘ on page 3 of your pattern.  Note: Do not follow the steps that involve cutting through the Template Layout Sheets as your instructor will go over this in class! Place fabric pieces in the specified bag.

The following items are needed to make this quilt.  Please make sure you bring the following items to class if they will not be provided by the organizer. They are essential to the techniques I teach:

Sewing Machine with a quarter-inch foot and Accessories
Steam Iron ~ Usually provided in Classroom
Ironing Board ~ Usually Provided in Classroom
One piece of Template Plastic (3″ by 12″ piece)
12″ Add-a-quarter ruler
Purple Thang (optional)
6″ by 12″ ruler
Medium size cutting mat (18” by 24”)
Rotary cutter 45mm or 60 mm
New rotary blade
Size 70 needles (Microtex Sharp recommended)
Scissors
Seam ripper
Surge protectors and Extension cords (We STRONGLY recommend making sure you have these to make sure you have power for your sewing machine).
Fabric glue UHU stic
Glue Pen (Fons and Porter, Sewline, or Avery recommended)
High quality cotton sewing thread
Flower pins
Scotch Tape
Large Ziploc Bags (If you have precut your fabric, you’ve already used your bags.  Make sure to bring them labeled and full of your fabric pieces according to the cutting directions on the day of class!)
Stapler
Binder Clips
Large Paper Clips

 

If you have any questions regarding this class, please contact your instructor directly. Contact information for Judy and her Certified Instructors is available on our website at http://quiltworx.com. Please include your correct email address, phone number, and name. You may also want to check out our website www.quiltworx.com and our facebook page quiltworx.com prior to selecting fabrics. There are many samples, slide shows, and color-changing quilts available for you to enjoy. We also have corrections and helpful hints posted for most of the patterns we have published.

Judy Niemeyer and the Certified Instructors

Print

    No Twitter Messages