Pre-cutting part of your fabric is a mandatory requirement prior to taking this course. Please begin preparing for class at least 1-WEEK prior to the class to make sure that you are able to get familiar with your pattern and complete the pre-cutting before hand. It is important that you have your pre-class cutting completed. If this step is not completed, you will have a very difficult time keeping up and participating in the instruction. We recommend reading through your entire pattern before beginning.

Fabric Selection: There are two different colorways displayed on the cover of the Winter Wonderland Table Runner, a light background and a dark background. The possibilities are endless with this tablerunner! Please refer to the yardage charts on the back of your pattern.

Prepare the Foundation Papers: Please refer to and follow the instructions under ‘Cutting out the Foundation Papers’ on page 2 of your pattern. You only need to cut one page of the foundations papers prior to class. Judy will demonstrate an easier method of doing this in class!

Preparing the Template Sheets: Please refer to and follow the instructions under ‘Cut out the Templates & Template Layout Sheets’ on page 2 of your pattern.

Cutting Instructions: Please read through ‘Cutting Information’ on page 2 and 3 of your pattern before beginning the steps below. We recommend checking our website for pattern corrections before you begin cutting your fabric. Note: Please make sure all of the Template Sheets, Foundation Sheets, and fabric pieces are placed in the correct bags!

Cutting Instructions for (1) Table Runner:

Complete Step 1 – 4 under Unit-A1 and A2: Background Fabric #B1 on page 2 of your pattern. Clip pieces using large paper clips or binder clips and place in Bag #1. Do not subcut the Template sheets as Judy will demonstrate this in class!

Complete Step 1 – 3 under Spike, Accent Fabric #A2 on page 3 of your pattern. Clip pieces using large paper clips or binder clips and place in the bag #2.Do not subcut the Template sheets as Judy will demonstrate this in class!

Complete Step 1 under Center Star, Accent Fabric #A3: on page 3 of your pattern. Clip pieces using large paper clips or binder clips and place in Bag #2.

You are not requiured to complete any additional cutting prior to class!

The following items will be used in class:

Sewing Machine with a quarter-inch foot and Accessories
Steam Iron
Ironing Board
One piece of Template Plastic (3″ by 12″ piece)
12″ Add-a-quarter ruler
Purple Thang (optional)
6″ by 12″ ruler
Medium size cutting mat (18” by 24”)
Rotary cutter 45mm or 60 mm
New rotary blade
Size 70 needles (Microtex recommended)
Scissors
Seam ripper
Surge protectors
Extension cords
Fabric glue UHU stic
Glue Pen (Fons and Porter, or Sewline recommended)
High quality cotton sewing thread
Flower pins
Scotch Tape
Large Ziploc Bags
Stapler
Binder Clips(Medium and Small)
Large Paper Clips

If you have any questions regarding this class, please contact your instructor directly. Contact information for Judy and her Certified Instructors is available on our website at http://quiltworx.com. Please include your correct email address, phone number, and name. You may also want to check out our website www.quiltworx.com and our facebook page quiltworx.com prior to selecting fabrics. There are many samples, slide shows, and color-changing quilts available for you to enjoy. We also have corrections and helpful hints posted for most of the patterns we have published.

Judy Niemeyer and the Certified Instructors